Parts

45 of 45 Items
  • AKS-74U Gas Piston, AK-74 Spec AKS-74U Gas Piston, AK-74 Spec

    AKS-74U Gas Piston, AK-74 Spec

    Heat treated on the inside and fully chrome plated on every outside surface, these gas pistons are the most faithful reproductions ever made! This listing is for a piston made to the original Russian/Bulgarian specs, for use with a 5.45x39 AK-74 bolt...

    $39.99
  • AKS-74U Dust Cover Assembly AKS-74U Dust Cover Assembly AKS-74U Dust Cover Assembly

    AKS-74U Dust Cover Assembly

    The ever elusive original style Krink top cover is finally available! Compatible with all original parts and accessories, including picatinny and briefcase mounts Comes fully assembled with a rear sight installed Parkerized finish Made from surplus AKM...

    $164.99
  • AKS-74U Gas Tube AKS-74U Gas Tube

    AKS-74U Gas Tube

    Brand new reproduction gas tubes for the Krink! Made to original specs, compatible with all original parts Heat treated Parkerized finish Locking surfaces left oversized to virgin spec for proper fitting to your rifle

    $89.99
  • AKS-74U Booster Muzzle Device AKS-74U Booster Muzzle Device AKS-74U Booster Muzzle Device

    AKS-74U Booster Muzzle Device

    Brand new reproduction boosters for the Krink! Threaded standard 24x1.5mm, fits all original AKS-74Us Heat treated Chrome lined through the entire inside, including threads. Easier to remove after fouling than any others! Parkerized finish

    $74.99
  • AKS-74U Combo Block Assembly AKS-74U Combo Block Assembly AKS-74U Combo Block Assembly

    AKS-74U Combo Block Assembly

    Brand new chrome lined gas blocks for the AKS-74U! These come assembled with everything you need, ready to build! These are concentric and square for suppressor use. All components have a parkerized finish. Combo gas block/front sight assembly, heat...

    $289.99
  • 4.5mm Side Folding Rear Trunnion 4.5mm Side Folding Rear Trunnion

    4.5mm Side Folding Rear Trunnion

    The times of dealing with finicky 4.5mm rear trunnions are gone! These Chefur Custom reproductions are the easiest trunnions to build on. This version has all the rivet holes drilled. The rivet holes will line up with the receivers below. If you are...

    $124.99
  • Bashar Blaster Bashar Blaster The original in Syria Bashar Blaster Bashar Blaster

    Bashar Blaster

    Originally seen on a North Korean Type 68 captured in Syria, the Bashar Blaster has come to America and is ready to make your build drippy as hell. Whatever Middle Eastern gunsmith originally made this phoned it in on the functionality department, but...

    $33.99
    Add to Cart
  • Type 68 Center Support Rivet Type 68 Center Support Rivet Type 68 Center Support Rivet

    Type 68 Center Support Rivet

    These center support rivets are the perfect way to add that finishing touch to your "Asian Contract" North Korean Type 68 build! They are an exact replica of the tiny, unique rivets found on the Type 68 AKs. This listing is for one rivet only. You will...

    $12.99
    Choose Options
  • 4mm Cross Pin for Rear Sight Block / Hinge Block

    4mm Cross Pin for Rear Sight Block / Hinge Block

    This is the cross pin that secures the rear sight block or hinge block onto the barrel on AKM rifles and their derivatives. These are made to the original Russian spec and are hardened.These will fit: AKM AK-74 and AKS-74u AK-100...

    $3.99
    Add to Cart
  • AKS-74u / Krink Plunger Spring

    AKS-74u / Krink Plunger Spring

    This is a spring for the Gas Tube Plunger on an AKS-74u.The fitment of these can vary. On some rifles, they will drop in. On other rifles you may need to trim 2-3 coils off to make the top cover close all the way. If you encounter any issues, please...

    $3.99
    Add to Cart
  • AKS-74u / Krink Gas Tube Plunger

    AKS-74u / Krink Gas Tube Plunger

    This is a Gas Tube Plunger for the AKS-74u. It rides inside the hinge block, and is pressed forward when you close the dust cover, securing the gas tube.Made to original Russian specs.

    $5.99
    Add to Cart
  • AKS-74u / Krink Dust Cover Pin

    AKS-74u / Krink Dust Cover Pin

    This is the pin used to install a Krink dust cover. Made to original Russian specs. You will need to flare both ends to secure the pin, much like a rivet. Most people accomplish this with two ball bearings on either side, being squished in a vise.

    $3.99
    Add to Cart
  • AKS-74u / Krink Hinge Block Hardware Only AKS-74u / Krink Hinge Block Hardware Only

    AKS-74u / Krink Hinge Block Hardware Only

    This is all the hardware you need to complete your Krink hinge block. This set includes: Cross pin for the dust coverGas tube lock plunger + spring4mm cross pin for securing the block to the barrel   This set will automatically be discounted...

    $14.99
    Add to Cart
  • Domed Rivet, Individual

    Domed Rivet, Individual

    This listing is for one domed center support rivet.Please visit this page for more information.

    $12.99
  • AKM Domed Center Support Rivet Kit AKM Domed Center Support Rivet Kit AKM Domed Center Support Rivet Kit

    AKM Domed Center Support Rivet Kit

    These domed center support rivets are the perfect way to add that finishing touch to your clone build! This kit includes one rivet and one reusable support plate.Additional rivets are available here at a discount when purchased with a kit or support tool...

    $25.98
  • Galil Bullet Guide, 5.56/.223

    Galil Bullet Guide, 5.56/.223

    This is a brand new, reproduction bullet guide for the Galil family of rifles, .223 / 5.56mm caliber.They are machined from 4140 steel, heat treated to original specs, and have a blued finish.These will include a rivet, but the rivets are running late...

    $49.99
  • AKS-74u / Krink Hinge Block AKS-74u / Krink Hinge Block AKS-74u / Krink Hinge Block

    AKS-74u / Krink Hinge Block

    Brand new reproduction hinge blocks for the AKS-74u. These are machined from 4140, heat treated, and come parkerized for protection.These are clones of a block from an original Bulgarian military AKS-74u kit. The press fit journal and outside width of...

    $135.99
    Add to Cart
  • AKS-74u / Krink Handguard Retainer AKS-74u / Krink Handguard Retainer

    AKS-74u / Krink Handguard Retainer

    Brand new reproduction handguard retainers for your AKS-74u build! These are machined from 4130 steel and heat treated to original specs, and come with a blued finish.These are sized to fit standard spec AKS-74u barrels. Fitment may vary with a...

    $94.99
    Add to Cart
45 of 45 Items
!

© 2024 Chefur Powered by BigCommerce All rights reserved. | Sitemap