20 of 20 Items
  • Khyber Pass Trumpet Slim Trumpet Classic Trumpet Slim Trumpet Slim
Pic courtesy of @snooze7.62 on instagram Trumpet Classic from Battlesnake

    Khyber Pass Trumpet Muzzle Device

    Add a functional, tribal flair to your AK rifle!Threaded 14x1 LH to fit most every AK. The Trumpet Slim has been reduced in size to fit a bayonet, while the Classic has a little more internal volume, thus compensating a little better. Both still match or...

    $29.99 - $79.99
  • AK-74 Bullet Guide

    AK-74 Bullet Guide

    Fully heat treated, parkerized finish, ready to build on.The rivet hole is slightly undersized to allow match drilling with your trunnion. These are compatible with: Surplus AK-74 Tantal Kalashnikov USA These are NOT compatible with: Palmetto State...

    $39.99
  • Blank AK Rear Sight Leaf, 1000m Blank AK Rear Sight Leaf, 1000m

    Blank AK Rear Sight Leaf, 1000m

    Make the perfect replacement for something unobtainable! These are fully heat treated, blued finish. These fit any AK that uses a 1000m sight leaf - including the AKM, AK-74, and AK-100 series. The "custom engraving" option includes refinishing and color...

    $34.99 - $49.99
  • RPK Gas Block Pin, pair

    RPK Gas Block Pin, pair

    Previously impossible to find, these RPK gas block pins are the perfect way to finish your kit!Heat treated and parkerized, ready to build with.This listing is for two pins, sold in pairs.

    $7.99
  • AKS-74U Reproduction Parts Kit AKS-74U Reproduction Parts Kit AKS-74U Reproduction Parts Kit

    AKS-74U Reproduction Parts Kit

    The first ever reproduction parts kits for the famous AKS-74U! Commonly referred to as the Krinkov, the AKS-74U has been a status symbol around the world since 1979. These were painstakingly reverse engineered and reproduced by us at Chefur Custom and...

    $1,020.91
  • AKS-74U Gas Piston, AKM Spec AKS-74U Gas Piston, AKM Spec

    AKS-74U Gas Piston, AKM Spec

    Heat treated on the inside and fully chrome plated on every outside surface, these gas pistons are the most faithful reproductions ever made! This listing is for a piston made to be used with an AKM or WBP 5.45/5.56 carrier.Please see this listing...

    $39.99
  • AKS-74U Gas Piston, AK-74 Spec AKS-74U Gas Piston, AK-74 Spec

    AKS-74U Gas Piston, AK-74 Spec

    Heat treated on the inside and fully chrome plated on every outside surface, these gas pistons are the most faithful reproductions ever made! This listing is for a piston made to the original Russian/Bulgarian specs, for use with a 5.45x39 AK-74 bolt...

    $39.99
  • Bashar Blaster The original in Syria Bashar Blaster Bashar Blaster As seen in the hands of Hamas

    Bashar Blaster

    Originally seen on a North Korean Type 68 captured in Syria, the Bashar Blaster has come to America and is ready to make your build drippy as hell. Whatever Middle Eastern gunsmith originally made this phoned it in on the functionality department, but...

    $33.99
  • Type 68 Center Support Rivet Type 68 Center Support Rivet Type 68 Center Support Rivet

    Type 68 Center Support Rivet

    This page is a placeholder until the rivets arrive. These center support rivets are the perfect way to add that finishing touch to your "Asian Contract" North Korean Type 68 build! They are an exact replica of the tiny, unique rivets found on the Type 68...

    $25.98
  • 4mm Cross Pin for Rear Sight Block / Hinge Block

    4mm Cross Pin for Rear Sight Block / Hinge Block

    This is the cross pin that secures the rear sight block or hinge block onto the barrel on AKM rifles and their derivatives. These are made to the original Russian spec and are hardened.These will fit: AKM AK-74 and AKS-74u AK-100...

    $3.99
  • AKS-74u / Krink Plunger Spring

    AKS-74u / Krink Plunger Spring

    This is a spring for the Gas Tube Plunger on an AKS-74u.The fitment of these can vary. On some rifles, they will drop in. On other rifles you may need to trim 2-3 coils off to make the top cover close all the way. If you encounter any issues, please...

    $3.99
  • AKS-74u / Krink Gas Tube Plunger

    AKS-74u / Krink Gas Tube Plunger

    This is a Gas Tube Plunger for the AKS-74u. It rides inside the hinge block, and is pressed forward when you close the dust cover, securing the gas tube.Made to original Russian specs.

    $5.99
  • AKS-74u / Krink Dust Cover Pin

    AKS-74u / Krink Dust Cover Pin

    This is the pin used to install a Krink dust cover. Made to original Russian specs. You will need to flare both ends to secure the pin, much like a rivet. Most people accomplish this with two ball bearings on either side, being squished in a vise.

    $3.99
  • AKS-74u / Krink Hinge Block Hardware Only AKS-74u / Krink Hinge Block Hardware Only

    AKS-74u / Krink Hinge Block Hardware Only

    This is all the hardware you need to complete your Krink hinge block. This set includes: Cross pin for the dust coverGas tube lock plunger + spring4mm cross pin for securing the block to the barrel   This set will automatically be discounted...

    $14.99
  • AKM Domed Center Support Rivet Kit AKM Domed Center Support Rivet Kit AKM Domed Center Support Rivet Kit

    AKM Domed Center Support Rivet Kit

    These domed center support rivets are the perfect way to add that finishing touch to your clone build! This kit includes one rivet and one reusable support plate.Additional rivets are available here at a discount when purchased with a kit or support tool...

    $25.98
  • Galil Bullet Guide, 5.56/.223

    Galil Bullet Guide, 5.56/.223

    This is a brand new, reproduction bullet guide for the Galil family of rifles, .223 / 5.56mm caliber.They are machined from 4140 steel, heat treated to original specs, and have a blued finish.These will include a rivet, but the rivets are running late...

    $49.99
20 of 20 Items