Parts

24 of 41 Items
  • Threaded Makarov Barrel, 9x18 Threaded Makarov Barrel, 9x18 Threaded Makarov Barrel, 9x18 Resilient Putnik with a custom modified JMac HUB adapter.

    Threaded Makarov Barrel, 9x18

    Available for the first time in over a decade, 1/2x28 threaded barrels for the Makarov!They are chambered in 9x18 Makarov, and fit all patterns, including commerical IJ-70s. These fit the following Makarovs: Russian, including commercial models and...

    $173.99
  • 1/2x28 Trilug adapter, face mount 1/2x28 Trilug adapter, face mount 1/2x28 Trilug adapter, face mount 1/2x28 Trilug adapter, face mount

    1/2x28 Trilug adapter, face mount

    New from Sovereign Development, Tri-lug adapters specifically designed to fit thin barrel profiles!These are guaranteed to work with my Gen 2 threaded Makarov barrels.I will modify them for free to work with my Gen 1 barrels, just tell me in the order...

    $69.00
  • AK Triangle Folder Stock Pin AK Triangle Folder Stock Pin

    AK Triangle Folder Stock Pin

    New production stock pins for your triangle folder AKs.Heat treated and parkerized, just like the OGs.4.5mm is for: AKS-74, AKS-74u, Arsenal SLR series5.5mm is for: AK-100 series (but not PSA AK100s), KP9

    $8.99
  • RPK Gas Block, Reproduction RPK Gas Block, Reproduction RPK Gas Block, Reproduction

    RPK Gas Block, Reproduction

    Is your RPK kit one of the many with a worn out gas block? Available for the first time, brand new gas blocks! These are heat treated, chrome lined, and blued. Ready to build on! The pins are available as add-on.  

    $137.99
  • SilencerCo 1/2x28 Piston, Face Mount

    SilencerCo 1/2x28 Piston, Face Mount

    These 1/2-28 SN pistons from SilencerCo make the perfect adapter for your threaded Makarov barrel!These are face indexing, exactly what's needed for skinny barrels like the Makarov and Glock 43.You will also need a fixed barrel spacer for use on a...

    $74.00
  • AK-74 Bullet Guide

    AK-74 Bullet Guide

    Fully heat treated, parkerized finish, ready to build on.The rivet hole is slightly undersized to allow match drilling with your trunnion. These are compatible with: Surplus AK-74 Tantal Kalashnikov USA These are NOT compatible with: Palmetto State...

    $39.99
  • AK Rear Sight Leaf, 1000m - multiple versions! AK Rear Sight Leaf, 1000m - multiple versions! Arabic Maadi

    AK Rear Sight Leaf, 1000m - multiple versions!

    Make the perfect replacement for something unobtainable! These are fully heat treated, blued finish. These fit any AK that uses a 1000m sight leaf - including the AKM, AK-74, and AK-100 series. The "custom engraving" option includes refinishing and color...

    $34.99 - $39.99
  • RPK Gas Block Pin, pair

    RPK Gas Block Pin, pair

    Previously impossible to find, these RPK gas block pins are the perfect way to finish your kit!Heat treated and parkerized, ready to build with.This listing is for two pins, sold in pairs.

    $7.99
  • Side Folding Stock Rear Hardware

    Side Folding Stock Rear Hardware

    New production side folder rear hardware. Compatible with 4.5mm and 5.5mm trunnions. Stock latch Stock latch spring Latch spring retainer pin Stock pins are available here.

    $32.99
  • Type 68 Center Support Rivet Type 68 Center Support Rivet Type 68 Center Support Rivet

    Type 68 Center Support Rivet

    These center support rivets are the perfect way to add that finishing touch to your "Asian Contract" North Korean Type 68 build! They are an exact replica of the tiny, unique rivets found on the Type 68 AKs. This listing is for one rivet only. You will...

    $12.99
  • 4mm Cross Pin for Rear Sight Block / Hinge Block

    4mm Cross Pin for Rear Sight Block / Hinge Block

    This is the cross pin that secures the rear sight block or hinge block onto the barrel on AKM rifles and their derivatives. These are made to the original Russian spec and are hardened.These will fit: AKM AK-74 and AKS-74u AK-100...

    $3.99
  • AKS-74u / Krink Plunger Spring

    AKS-74u / Krink Plunger Spring

    This is a spring for the Gas Tube Plunger on an AKS-74u.The fitment of these can vary. On some rifles, they will drop in. On other rifles you may need to trim 2-3 coils off to make the top cover close all the way. If you encounter any issues, please...

    $3.99
  • AKS-74u / Krink Gas Tube Plunger

    AKS-74u / Krink Gas Tube Plunger

    This is a Gas Tube Plunger for the AKS-74u. It rides inside the hinge block, and is pressed forward when you close the dust cover, securing the gas tube.Made to original Russian specs.

    $5.99
  • AKS-74u / Krink Dust Cover Pin

    AKS-74u / Krink Dust Cover Pin

    This is the pin used to install a Krink dust cover. Made to original Russian specs. You will need to flare both ends to secure the pin, much like a rivet. Most people accomplish this with two ball bearings on either side, being squished in a vise.

    $3.99
  • RPK Carry Handle, Clip-on RPK Carry Handle, Clip-on

    RPK Carry Handle, Clip-on

    Available for the first time ever, carry handles that don't require modification to the host rifle!Originally debuted on the Romanian RPK-74, the RPK carry handle was later made famous by it's use on the AES-10B which was then put into a ton of video...

    $47.49 - $94.99
  • AKS-74U Rear Trunnion Rivet Set

    AKS-74U Rear Trunnion Rivet Set

    Bulgarian made rivet sets for the AKS-74U triangle folding rear trunnion.These have proper flat heads to get the authentic look.Includes one long rivet, and 5x short rivets (only 4 are needed, one is a free "oopsie" rivet).For maximum authenticity, the...

    $7.49
  • AKS-74u / Krink Hinge Block AKS-74u / Krink Hinge Block AKS-74u / Krink Hinge Block

    AKS-74u / Krink Hinge Block

    Brand new reproduction hinge blocks for the AKS-74u. These are machined from 4140, heat treated, and come parkerized for protection.These are clones of a block from an original Bulgarian military AKS-74u kit. The press fit journal and outside width of...

    $135.99
  • AKS-74u / Krink Handguard Retainer AKS-74u / Krink Handguard Retainer

    AKS-74u / Krink Handguard Retainer

    Brand new reproduction handguard retainers for your AKS-74u build! These are machined from 4130 steel and heat treated to original specs, and come with a blued finish.These are sized to fit standard spec AKS-74u barrels. Fitment may vary with a...

    $94.99
  • Yugo M70AB1 Front Trunnion, Cut for Galil Gas Tube

    Yugo M70AB1 Front Trunnion, Cut for Galil Gas Tube

    Order from apex has been placed, group buy is cut off. Thanks everyone.   This is a group buy for surplus Yugoslavian M70AB1 front trunnions.These will be purchased by me on Friday the 7th of March, from Apex. After tax and shipping the unit cost is...

    $15.00 - $137.90
  • 4.5mm Side Folding Rear Trunnion, No Short Rivet Holes 4.5mm Side Folding Rear Trunnion, No Short Rivet Holes

    4.5mm Side Folding Rear Trunnion, No Short Rivet Holes

    The times of dealing with finicky 4.5mm rear trunnions are gone! These Chefur Custom reproductions are the easiest trunnions to build on. This version has no short rivet holes. For use on Childers, AK-Builder, or all other receivers with pre-drilled...

    $124.99
  • Russian/Romanian Chinese

    40 Round AK Magazines, 7.62x39

    These are assorted 40 round AK magazines.All of them are surplus (except the KCI option)They range from very rusty to kinda rusty. None of them are nice.All magazines in this listing have been tested for basic function and passed.NO HAND PICK

    $5.00 - $49.99
  • 30 rounders 40 rounders

    Evidence Locker AK Magazines

    All of these magazines came out of an evidence locker. I believe from Puerto Rico.These are all surplus steel (with the exception of the discounted KCI).They have all passed a basic function check (shoving the follower down with a stick).All magazines...

    $9.99 - $15.00
24 of 41 Items